Touch Screen N95 Fully Automatic Mask Making Machine
1. High automation with PLC, photoelectric detection for the raw material feeding to avoid wasting and with high stability.
2. Import cutting roll, no burr and durable in use.
3. Material feeding by servo motor, accurate in earloop position adjustment and welding. Small in size, solid and rustproof performance with aluminum alloy frame rack.
4. 20k ultrasonic ear loop welding, strong in welding portion and pulling.
5. Patent equipment, leading technology, mature process, stable quality and high efficiency.
| Model Number: |
ZPFM95 |
Machine Size: |
(9M*1.4M*2M)(L*B*H) |
| Condition: |
New |
Packing Weight: |
/ |
| Automatic Grade: |
Automatic |
Packing Volume: |
/ |
| Qualification rate |
98-99% |
Equipment utilization rate |
≥98% |
| Power: |
11 KW |
Product Size Error |
±1mm |
| Power |
380V±10% 50Hz |
Place Of Origin: |
China |
| Air supply |
0.6Mpa-0.8Mpa |
Packing: |
Wooden case |
| Output: |
30~45 Pcs/min |
After Sales services: |
Engineer available |
| Control Model: |
New Model |
Warranty: |
One Year |
| Working conditions |
| Ambient temperature |
5 ℃ ~ 35 ℃ |
| Altitude |
＜ 2000m |
| Relative humidity |
＜ 85% (no condensation) |
| Installation site |
indoor flat ground |
| Air source |
0.45mpa-0.65mpa |
Structure introduction: The mechanical part is divided into nine structures: cloth unwinding device, nose line installation device, fuse device, ear belt feeding device, mask folding device, finished product welding device, finished product cutting device and discharging device.
- Cloth unwinding device: The cloth is pulled forward along with the material pulling wheel to lift the swing rod, and a displacement sensor is installed behind the swing rod. When the swing rod is lifted to rotate the metal induction plate to leave, the sensor sends a signal, and the motor rotates to transport the cloth, and then the automatic control of tension feeding can be realized.
- Nose line installation device: The power of the nose line comes from the feeding motor. The nose line is first corrected by the nose line correction wheel. The corrected nose line is sent to the cutting mold by the feeding motor for cutting, and then pushed into the nose line welding position through the rear motor for down pressing and fusion.
- Fusing device: After the cloth enters the tooth mold, it is welded by ultrasonic.
- Ear Loop feeding: The Ear Loop is rotated and clamped and wound on the rotating disk. With the rotation of the rotating disk, the Ear Loop tension belt should move upward. The Ear Loop induction switch senses that the induction ring leaves the induction point and starts the motor. The motor drives the Ear Loop puller to transport the ear belt.
- Mask folding device: The cloth will fold in half after passing the slope
- Finished welding device: After folding, the products are welded together by ultrasonic.
- Finished product cutting device: The cutter rotates the cloth through the middle to make the product shape
- Discharging: The rotating mechanism drives the belt to rotate so that the products flow out along the belt direction.
Features
1. High stability, low failure rate, beautiful appearance without rust.
2. Computer PLC programming control, servo drive, high degree of automation.
3. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
4. The automatic mask making machine is automatic from material feeding to mask collection.
5. High automation in ear-loop welding, edge wrapping, counting, and material discharging.
6. The ultrasonic technique does no harm to the characteristic of the material. Easy and safe operation.
7. Artistic and durable, aluminum alloy board, lean and practicality.
8. Faster, Rotary connection device of Independent innovation design.
9. More stable, upgraded machine, touch screen, Taiwan photoelectric detection, stable performance, and low failure rate.
FAQ
Q1: What is the guarantee of the machine?
A1: The guarantee period of our machine is 12 months after the machine is installed well in buyer's factory;
Q2: What package do you use for the machine?
A2: Painted the machine with anti-corrosion oil, and then covered with plastic film, and then packed into wooden case or fixed onto wooden pallet as per clients' requirements, or shall be loaded into container with film packing. After fixed all machines, we will use drying agent to keep container inside dry.
Q3: Do you have instruction manual to guide us if i buy the machine?
A3: Yes, we supply detailed user manual for your reference. PLS read it carefully for guide. If there is still problem which could not be solved, PLS contact us, we are ready to help you anytime.
